Procedure - Boss BR-600 Owner's Manual

Recording
■

Procedure

fig.00-530
1
Press [REC MODE] repeatedly until INPUT is
indicated for REC MODE at the left of the screen.
The BR-600 will now enter Input mode.
fig.00-540
2
Press [REC].
[REC] flashes in red and the BR-600 enters the
recording standby state.
fig.00-550
3
Press [PLAY].
[PLAY] lights in green, the [REC] and REC TRACK
buttons now light solidly instead of flashing in red,
and recording begins.
fig.00-560
46
1
4 3 2
Flash
Lit
4
When you finish recording, press [STOP].
The REC TRACK button lights alternately in orange
and green, indicating that track contains recorded data.
* During updating, "Keep power on!" appears in the upper
line of the display, while the lower line shows what is being
processed.
You cannot play back sounds recorded for less than
one second.
How the Tracks Are Organized
The BR-600 features eight audio tracks that can be used
for recording and playback.
Tracks 1 – 4 are independent mono tracks. Tracks 5/6
and 7/8 are linked as stereo tracks.
Tracks 5/6 and 7/8 are fixed as left/right tracks,
respectively, while fader movements, Loop Effects, and
other processes are applied in common to both tracks.
These two tracks thus make a convenient bounce
destination (p. 65). Tracks 7/8 can also be used for
mastering (p. 111).
In addition to, and separate from the audio tracks, the
BR-600 also includes dedicated stereo tracks for
playback of the internal rhythms (p. 132).