Saving The Pitch Correction Settings (Write) - Boss BR-600 Owner's Manual

Saving the Pitch Correction
Settings (Write)
Modified Pitch Correction settings are saved by writing
them together under a new patch name.
* If you do not need to change the patch name, go to Step 4
after entering the Pitch Correction patch selection screen.
1
At the Pitch Correction patch selection screen, press
CURSOR [ ] to move the cursor to "NAME," and
press [ENTER].
The Patch Name Setting screen appears in the display.
fig.03-660
2
Use CURSOR [ ] [
to enter the patch name.
* Press [ENTER] to switch between uppercase and lowercase.
3
After you have completed entering the patch name as
desired, press [EXIT] to return to the Patch selection
screen.
4
Press CURSOR [ ] [
"WRITE," and press [ENTER].
The Write screen appears in the display.
fig.03-670
5
Turn the TIME/VALUE dial to select the patch
number to which to write the new patch.
6
After you've selected the destination, press [ENTER].
"Are you sure?" appears in the display.
] and the TIME/VALUE dial
] to move the cursor to
Fixing the Pitch of Vocals (Pitch Correction)
7
Press [ENTER]. (To cancel the operation press
[EXIT].)
The Pitch Correction patch will be written.
After the save has been completed, you are returned to
the Pitch Correction patch selection screen.
* During updating, "Keep power on!" appears in the upper
line of the display, while the lower line shows what is being
processed.
You cannot write patches while songs are being
recorded or played back.
127