Enhancer; Equalizer; Flanger; Foot Volume - Boss BR-600 Owner's Manual

Insert Effect Parameter Functions

Enhancer

By adding sounds which are out-of-phase with the direct
sound, this effect enhances the definition of the sound, and
pushes it to the forefront.
On/Off
This parameter turns the enhancer effect on/off.
Sens
Adjusts the manner in which the enhancer will be applied
relative to the input signals.
Freq
Adjusts the frequency at which the enhancer effect will
begin to be applied. The effect will be made apparent in the
frequencies above the frequency set here.
Mix Level
Adjusts the amount of phase-shifted sound of the range set
by "Frequency" that is to be mixed with the input.
Lo Mix Lvl
Adjusts the amount of phase-shifted sound of the lower
range that is to be mixed with the input. The frequency
range in which the effect is applied is fixed.
Level
Adjusts the volume of the enhanced sound.

Equalizer

A 4-band equalizer.
* You can use this effect with the following algorithms when "4BAND
EQ" is selected for the 4BAND EQ/WAH "Type" setting.
COSM GTR AMP
COSM COMP GTR
BASS MULTI
On/Off
This parameter turns the equalizer effect on/off.
Low Gain
This parameter sets the gain (amount of boost or cut) for the
bass equalizer.
Lo-M Gin
This parameter sets the gain (amount of boost or cut) for the
low-midrange equalizer.
Lo-M F
This parameter sets the central frequency for the low-
midrange equalizer.
Lo-M Q
This parameter sets the range of change in gain for the
frequency set by "Lo-M F." A larger value results in a
narrower range of change.
104
OFF, ON
0 – 100
1.0 – 10.0 kHz
0 – 100
0 – 100
0 – 100
COSM BASS AMP
COSM COMP BSS
STEREO MULTI
OFF, ON
-20 – +20 dB
-20 – +20 dB
100 Hz – 10.0 kHz
0.5 – 16
Hi-M Gin
This parameter sets the gain (amount of boost or cut) for the
high-midrange equalizer.
Hi-M F
This parameter sets the central frequency for the high-
midrange equalizer.
Hi-M Q
This parameter sets the range of change in gain for the
frequency set by "Hi-M F." A larger value results in a
narrower range of change.
Hi Gain
This parameter sets the gain (amount of boost or cut) for the
treble equalizer.
Level
This parameter adjusts the volume after the equalizer stage.

Flanger

This produces a flanging effect that gives a sort of
"twisting" character to the sound.
* This effect can be used when the MODULATION "Type"
parameter is set to "FLANGER."
On/Off
This parameter turns the flanger effect on/off.
Rate
Determines the rate of the flanging effect.
Depth
Determines the depth of the flanging effect.
Manual
Adjusts the center frequency at which to apply the effect.
Resonance
Determines the amount of resonance (feedback). Increasing the
value will emphasize the effect, creating a more unusual sound.
Separation
Adjusts the diffusion. The diffusion increases as the value
increases. This will be effective when stereo output is used.
* This effect is obtained with stereo recording (using two tracks).

Foot Volume

This is a volume control effect.
By using an expression pedal to control the foot volume,
you can smoothly change the volume of the output sound.
For a detailed explanation, see "When Using an Expression
Pedal" (p. 191).
On/Off
Switches the foot volume on/off.
-20 – +20 dB
100 Hz – 10.0 kHz
0.5 – 16
-20 – +20 dB
-20 – +20 dB
OFF, ON
0 – 100
0 – 100
0 – 100
0 – 100
0 – 100
OFF, ON