Placing Calls - AT&T SYSTEM 25 User Manual

Placing Calls

You can place calls to people inside your company
buttons and you can place calls to
outside your company with the following buttons.
The green light next to a
the lines out of your company are busy. If the green light is on,
you can activate a busy-to-idle reminder. This reminder lets you
know when you can make
Placing an Inside Call
1 Lift the
2 Dial the PDC.
Placing an Outside Call Using SYSTEM ACCESS
1
2
3
button indicates when all of
your call.
handset and listen for dial tone.
Lift the handset and listen for dial tone.
Dial the outside line access code and listen for
dial tone.
Dial the telephone number.
Note
If you hear the preferred route tone, all of the
routes out of your company are busy and
your call is being queued. You can either
stay on the line until your call is completed,
or you can hang up and try your call later.
with
people
(Continued) 35