Burner Identification; Number Of Startups Resettable - Siemens LMV36.520A1 Basic Documentation

26.2.3 Burner identification

/reset
1...3 s
/reset
or
ESC
The burner's identification can be set on the parameter level!
To the next parameter

26.2.4 Number of startups resettable

/reset
1...3 s
/reset
or
ESC
The number of startups can be reset on the parameter level!
To the next parameter
Building Technologies Division
Infrastructure & Citiies Sector
P
V h min s %
P
V h min s %
P
V h min s %
P
V h min s %
P
V h min s %
P
V h min s %
Basic documentation LMV36...
26 Info level
The display shows parameter 113: flashing on the
left, characters ._._ on the right.
Example: 113: ._._
Press for 1...3 s to show the burner's
/reset
identification.
Default setting: - - - - - - - -
Example: 3
ESC
Press or to return to the display of
/reset
parameters.
Back to the previous
parameter
The display shows parameter 164: flashing on the
left, characters ._._ on the right, since display of
the number of startups may comprise more than 5
digits.
Example: Parameter 164: ._._
Press for 1...3 s to show the number of
/reset
startups (resettable).
Example: 36
ESC
Press or to show parameter 164
/reset
flashing again.
Back to the previous
parameter
173/248
CC1P7544en
25.09.2013