Siemens LMV36.520A1 Basic Documentation page 228

Par. Parameter
no. LMV36...
614 Fuel 1: Type of actuator
0 = 5 s / 90° (1 Nm, 1,2 Nm, 3 Nm)
1 = 10 s / 90° (SQM33.6)
2 = 17 s / 90° (SQM33.7)
641 Control of speed standardization of VSD
Error diagnostics of negative values (refer to error code 82)
0 = no speed standardization
1 = speed standardization active
642 Standardized speed
Index 0 = speed 1
Index 1 = speed 2 (internal monitoring)
645 Configuration of analog output
0 = DC 0...10 V
1 = DC 2...10 V
2 = DC 0/2...10 V
652 VSD behavior when safety loop / burner flange is open
0 = no VSD control when safety loop / burner flange is open
1 = VSD control independent of safety loop / burner flange
653 VSD standstill supervision in standby mode
0 = deactivate
1 = active
700 Error history
701 Error history: 701-725.01.Code
• Error history: 701-725.02.Diagnostic code
• Error history: 701-725.03.Error class
• Error history: 701-725.04.Phase
• Error history: 701-725.05.Startup counter
• Error history: 701-725.06.Output
725 Error history: 701-725.07.Fuel
900 Process data
903 Current output
Index 0 = fuel
228/248
Building Technologies Division
Infrastructure & Citiies Sector
Number of Type Edit
elements
2 Std_u8 Edit
1 Std_s8 Edit
2 Std_u16 Read only
1 Std_u8 Edit
1 Std_u8 Edit
1 Std_u8 Edit
25 Std_u8 Read only
25 Std_u8 Read only
25 Std_u8 Read only
25 Std_u8 Read only
25 Std_s32 Read only
25 Output Read only
25 Std_u8 Read only
2 Output Read only
Basic documentation LMV36...
29 Parameter list LMV36...
Value range Resolution
Min Max
0 2 1
-25 1 1
650 6500 0.1
0 2 1
0 1 1
0 1 1
0 255 1
0 255 1
0 6 1
0 255 1
0 99999999 1
0% 100% 0.1%
0 255 1
0% 100% 0.1%
Default Password level
setting
0; 0 SO
Password level
write: OEM
0 SO
undefined SO
0 SO
1 SO
1 SO
0 Info / Service
0 Info / Service
0 Info / Service
0 Info / Service
0 Info / Service
0% Info / Service
0 Info / Service
0% Info / Service
CC1P7544en
25.09.2013