Agm60 - Siemens LMV36.520A1 Basic Documentation

Notes for mounting
Mounting method
Building Technologies Division
Infrastructure & Citiies Sector
1.2.2

AGM60...

101
0,3
Figure 2: AGM60... note for mounting
Screwed
If the unit is screwed on, following must be observed:

The AGM60... switch unit must be secured with fixing screws M4 (UNC32),
observing a maximum tightening torque of 1.8 Nm and using all 4 fixing points

The additional mounting surfaces on the housing must be used; they are provided
to improve mechanical stability and must fully rest on the mounting surface. The
flatness of the mounting surface must be within a tolerance band of 0.3 mm
Basic documentation LMV36...
1 Safety notes
69
85
On a DIN rail
A = mounting B = removal
Mounting on DIN rails requires a
mounting clip!
CC1P7544en
M4 (4x)
Bild 258e/0309
15/248
25.09.2013