Fuji Xerox DocuPrint CP315 dw User Manual page 94

Status-Code
091-960
091-961
091-962
091-963
092-310
093-925
093-928
093-950
093-951
093-952
093-980
093-981
093-982
093-926
093-960
093-961
093-962
093-930
093-931
093-932
093-933
093-970
093-971
093-972
093-973
193-700
94
User Guide
What you can do
Remove the unsupported drum cartridge of the specified color, and then install a
supported drum cartridge.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)."
Turn off the printer. Clean the Color Toner Density (CTD) sensor with a clean dry
cotton swab, and then turn on the printer. Contact customer support if this failure
is repeated.
Refer
• For details, see "Cleaning the Color Toner Density (CTD) Sensor (P.110)."
Turn off the printer. Make sure that toner cartridge of the specified color is
correctly installed, and then turn on the printer. The status code differs depending
on the color of the toner cartridge. Contact customer support if this failure is
repeated.
Refer
• For details, see "Replacing the Toner Cartridges (P.101)."
Remove the unsupported toner cartridge of the specified color, and then install a
supported toner cartridge.
Refer
• For details, see "Replacing the Toner Cartridges (P.101)."
Remove the used toner cartridge of the specified color, and then install a new
cartridge.
Refer
• For details, see "Replacing the Toner Cartridges (P.101)."
Make sure that the toner cartridge of the specified color is fully installed.
Refer
• For details, see "Replacing the Toner Cartridges (P.101)."
Non-genuine toner cartridges are installed. Check the settings to enable the
Non-Genuine mode.
Refer
• For details, see "Non-Genuine Mode (P.170)."