1.
Load the envelopes to the bypass tray or tray1.
2.
Adjust the paper guides for tray1, or adjust the width guides for the bypass tray accordingly after
envelopes are loaded.
3.
Select [Envelope] for the paper type, and then select the correct size of the envelopes from the print
driver.
Envelope #10, Monarch, or DL
Load the envelopes with the flaps closed and the print side facing up. Make sure that the flaps are on the left
side when you face towards the printer.
C5
For envelopes with the flaps open:
Load the envelopes with the print side facing up. Make sure to load the bottom edge of the envelopes first.
For envelopes with the flaps closed:
Load the envelopes with the print side facing up. Make sure to load the top edge of the envelopes first.
76
User Guide