Fuji Xerox DocuPrint CP315 dw User Manual page 22

2.
Press the or
Note
• If [Panel Lock] is enabled, enter the password. For details about this setting, see "Panel Lock (P.41)."
3.
Press the or
4.
Press the or
5.
Press the or
6.
Press the or
7.
Enter the SSID, and then press the
8.
Press the or
press the button.
Note
• When [Wi-Fi Direct] is enabled, you cannot select [Ad-hoc].
9.
Press the or
[WPA2-PSK-AES], or [WEP].
• If you do not set security for your wireless network:
a
Press the
• If you use [Mixed mode PSK] or [WPA2-PSK-AES] encryption:
a
Press the
b
Enter the passphrase, and then press the
• If you use [WEP] encryption:
a
Press the
b
Enter the WEP key, and then press the
c
Select the desired transmit key, and then press the
Note
• A passphrase is an encryption key and may be described on your access point or wireless router. For details, see the
manual supplied with the access point or wireless router.
• If you select [Ad-hoc], [Mixed mode PSK] and [WPA2-PSK-AES] are not available.
The printer restarts automatically to complete the wireless connection setting.
Changing the Wireless Settings
To change the wireless settings of the printer from your computer, start CentreWare Internet Services. See
"Starting CentreWare Internet Services (P.61)."
You can also set the same settings using the "Software/Product Manual" disc.
22
User Guide
button to select [Administrator Menu], and then press the
button to select [Network Setup], and then press the
button to select [Wi-Fi], and then press the
button to select [Wi-Fi Setup], and then press the
button to select [Manual Setup], and then press the
button.
button to select the network mode from [Infrastructure] and [Ad-hoc], and then
button to select the encryption type from [No Security], [Mixed mode PSK],
or button to select [No Security], and then press the
or button to select [Mixed mode PSK] or [WPA2-PSK-AES], and then press the
or button to select [WEP], and then press the
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.