Fuji Xerox DocuPrint CP315 dw User Manual page 167

Paper Size
Paper Weight
Paper Tray Capacity
Output Tray Capacity
2 Sided Feature
Memory Capacity
Hard Disk Capacity
Installed Fonts
Page Description Language
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or less; left and
right edges, 4 mm or less
Standard 250 sheet tray (Tray1): 60 – 220 gsm
Bypass Tray: 60 – 220 gsm
2 Sided Print: 60 – 176 gsm
Optional 550-sheet feeder (Tray2): 60 – 220 gsm
Important
• The use of paper recommended by Fuji Xerox is suggested. Printing may not
be performed correctly depending on the paper type, paper quality, or paper
size. When using custom-size paper, check the paper feeding performance in
advance. Do not use special ink jet paper. Postcards made from recycled paper
may not be used at times. Print quality may deteriorate if printing on
preprinted paper or the back of printed paper, or if the environment of use is
dry, cold, or hot and humid climates. For details, contact the Fuji Xerox local
representative office or an authorized dealer.
Standard: Tray1: 250 sheets, Bypass Tray: 50 sheets
Optional: Optional 550-Sheet Feeder: 550 sheets (x 1 tray)
Max: 850 sheets (Standard + Optional 550-Sheet Feeder)
Important
• When using 80 gsm paper
Standard: 150 sheets (face down)
Important
• When using 80 gsm paper
Standard
Standard: 512 MB (onboard)
Optional: —
―
Standard: PCL: 81 fonts and 36 symbol sets, PostScript 3 Compatible: 80 fonts
Important
• The verification with OCR-B or barcode scanner is required for OCR or barcode
reading. We recommend you to check the availability in advance.
PCL6, PCL5e, PostScript 3 Compatible
167
Appendix