Equally Spaced Colored Dots
Problem
The printout has equally spaced
colored dots
Vertical Blanks
Problem
The printout has vertical blanks.
Action
1
Replace the drum cartridges and print a Demo Page for verification.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)" and "[Demo
Page] (P.44)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.
Action
1
Clean inside the printer by using the cleaning rod and print a Demo Page for
verification.
Refer
• For details, see "Cleaning the LED Print Head (P.110)" and "[Demo
Page] (P.44)."
If the problem persists, proceed to step 2.
2
Make sure that the drum cartridges are installed correctly.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)."
If the problem persists, proceed to step 3.
3
Replace the drum cartridges and print a Demo Page for verification.
Refer
• For details, see "Replacing the Drum Cartridges (P.103)" and "[Demo
Page] (P.44)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.
147
7 Troubleshooting