Test Print - Xerox WorkCentre PE120i System Administration Manual

Test Print

To ensure the WorkCentre PE120i has been installed on the network correctly a test print
should be submitted from a client workstation. Perform the following steps:
Open a document on a client workstation.
1
Select the WorkCentre PE120i as the printer for sending documents to.
2
Print the document on the device and verify that it prints correctly.
3
Ensure the print driver is installed on every workstation that will be sending jobs to the
4
device.
Repeat the test for all workstations that will be sending jobs to the device.
5
Page 4-14 Xerox WorkCentre PE120i System Administration Guide