Xerox WorkCentre PE120i System Administration Manual page 79

Enter the [NDS Tree] and [NDS Context] if using NDS.
6
Enable the [Service Advertising Protocol (SAP)].
7
Enter the [Primary File Server] name, if using Bindery.
8
Click the [Apply] button to implement any changes.
9
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Select the [Status] tab and then select [Reset Network Controller] to enable the
10
selections to take effect.
Continue with Test Print.
11
Test Print
To ensure the device has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
Open a document on a client workstation.
1
Select the device as the printer to which the selected document will be sent.
2
Print the document on the device and verify that it prints correctly.
3
Ensure the driver is installed on every workstation that will be sending jobs to the device.
4
Repeat the test for all workstations that will be sending jobs to the device.
5
The installation process is now complete.
6
Xerox WorkCentre PE120i System Administration Guide Page 6-13