Driver Installation - Xerox WorkCentre PE120i System Administration Manual

Driver Installation

Installing Xerox Drivers in Microsoft Windows XP or Windows 2000
using the USB port
Plug the USB cable into the PE120 and connect to your Personal Computer (PC). Start
1
your PC and turn on the PE120.
Insert the Xerox Drivers CD into the CD-ROM drive.
2
The "Found New Hardware Wizard" will display. Confirm that the radio button "Install the
3
software automatically" is chosen. Click [Next].
The Wizard will begin to install the scan driver for the PE120.
4
When the "Completing the Found New Hardware Wizard" screen displays click [Finish].
5
The scan driver for the PE120 is now loaded.
The "Found New Hardware Wizard" will display. Confirm that the radio button "Install the
6
software automatically" is chosen. Click [Next].
The Wizard will begin to install the PCL Print driver for the PE120.
7
The Hardware Wizard will search the CD-ROM drive for the print driver and will display the
8
following screen.
When the "Completing the Found New Hardware Wizard" screen displays click [Finish].
9
The PCL print driver for the PE120 is now loaded.
From within Microsoft Windows click [Start] and then [Settings] and then [Printers and
10
Faxes]. Click on the "Xerox WC PE120 series PCL6" printer object and then select [File]
and then [Properties]. When the screen appears click [Print Test Page]. The PE120 will
now print a test page. If the PE120 does not print then click [Troubleshoot...] and follow
the instructions on screen.
If you want the PE120 to be your default printer. From within Microsoft Windows click
11
[Start]and then [Settings] and then [Printers and Faxes]. Click on the "Xerox WC PE120
series PCL6" printer object and then select [File] and [Set as Default Printer].
Page 7-4 Xerox WorkCentre PE120i System Administration Guide