Table of Contents
Advertisement
Job ticket options
The Printer default option
Setting job ticket options for XDS
9-2
Guide to Printing Using Xerox Production Print Services
A Printer default selection appears in many of the job ticket
fields. This option can be used to print the job using the queue
default, the queue override, or the option that was set using the
PostScript setpagedevice command.
When [Printer default] is selected, the job is printed using the
option that was set in one of the categories that are shown in
priority order in the following figure.
The figure above illustrates that parameters specified as queue
overrides at your printing system controller are used as defaults
first. If no queue overrides have been specified, parameters on
any exception pages are used, and so on.
A job ticket specifies a set of printing options that the system will
use for a job. Every time you print a job, you must specify or
create a job ticket for it. The information in this job ticket
accompanies the job to the printer, and gives the printer
instructions on how to print it.
You select or enter parameters for the job ticket in the fields on
the Setup window. You can apply this set of specifications to your
current print job only, or you can save them as a job ticket file
and retrieve the file for use with other jobs.
Advertisement
Table of Contents
