Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Selecting the type of page description language
The [PDL Type] field, located in the section of the Job
Submission window, displays the type of page description
language, or PDL, in which the selected document file was
saved. You can specify a different PDL type for the job by
following these steps:
1. From the PDL Type menu, select the page description
language for your document. The options that are available
depend on the selected printer. Refer to the "Job ticket
features by printer" chapter for information on the options that
each printer supports.
Select the [Printer Default] check box if you want to set the
PDL that was specified at the printer controller.
2. If you select one of the Plain Text options, the following fields
are enabled in the PDL Type field:
•
[Orientation]: Select the font orientation from the pull-
down menu.
•
[Font Name]: Select the font from the pull-down menu.
•
[Font Size]: Enter a number for the font size, or select
the arrow buttons until the desired size is displayed.
Selecting the queue default job ticket
If you want to use the default job ticket parameters that were
specified at the controller for the queue that you selected, follow
these steps:
1. Select the queue and the file to print.
2. Select [Restore Queue Default Ticket]. The following
message is displayed:
Are you sure you want to restore the current settings to
the queue's default Job Ticket?
3. Select [OK]. The settings that are specified for your selected
queue are displayed in the Job Submission window fields.
Selecting the default job ticket
The default job ticket, once one has been saved, is the set of job
programming parameters that are displayed when you first view
the Job Submission window.
When you switch to a new print queue, the currently displayed
job ticket does not change.
Printing a job using the DocuSP web interface
4-5
Advertisement
Table of Contents
