Job Ticket Options; Setting Up A Print Job; Printer Limitations Window - Xerox 701P40016 Print Manual

9.

Job ticket options

This chapter contains the procedures for printing a document
using the XDS and XDS Plus software on a Xerox printing
system from your computer running Windows 95, Windows 98,
Windows NT 4.0, Windows 2000, Windows Millennium, XP, or a
Sun workstation that is running Solaris 2.6 or 2.8. From a
Macintosh OS 8.6, 9.x, or OS in Classic Mode when running
XDS. When running XDS Plus, a Macintosh using OS X Native
mode must be used. The Xerox Document Submission (XDS),
the Xerox Document Submission Plus (XDS Plus) software, the
Xerox Custom drivers, and the DocuSP Web Client provide you
with windows you use to select a document file, to set up the job
ticket, and to submit your print job to the printer.

Setting up a print job

To set up a print job, you specify parameters that define the
appearance and destination of the printed output.
The Setup window enables you to specify the parameters for the
job that you are printing. On the Setup window, job setup
specification tasks may be accessed from icon buttons on the
icon bar, the pull-down menus on the menu bar, and the job
ticket fields that compose the rest of the window.

Printer Limitations window

If the current job ticket contains parameters that are not available
on the selected printer, the Printer Limitations window will
appear. On this window you can assign defaults to the indicated
areas, or cancel the operation. Select [Assign Defaults] to make
changes to the current job ticket, or select [Cancel the Operation]
to cancel. If you cancel, you return to the startup XDS window
and can select a different printer, or select a new job ticket.
NOTE: Printer Limitations is not available on Macintosh
systems.
9-1