Modifying The Default Job Ticket; Selecting The [Printer Default] Option - Xerox 701P40016 Print Manual

Printing a job using the DocuSP web interface

Selecting the [Printer Default] option

4-6
Guide to Printing Using Xerox Production Print Services
If you want to use the default job ticket that is stored on your
workstation to print the job, follow these steps:
1. Select the queue and the file to print.
2. Select [Restore My Default Ticket]. The following message is
displayed:
Are you sure you want to restore the current settings to
your default Job Ticket?
3. Select [OK]. The settings that are specified in your default job
ticket are displayed in the Job Submission window fields.

Modifying the default job ticket

You can make changes to the default job ticket that is stored on
your workstation and save the modified job ticket with those
changes.
NOTE: You are not able to create additional job tickets from
your default job ticket. You have access to only one job ticket for
your workstation. Each workstation can have its own default job
ticket.
Follow these steps to change parameters on your default job
ticket:
1. On the Job Submission window, ensure that your default job
ticket options are displayed by selecting [Restore My Default
Ticket], then selecting [OK] on the confirmation message
window.
2. In the parameter fields, enter or select any options that you
want to change.
3. Select [Save My Default Ticket]. A confirmation window
opens, displaying the following message:
Are you sure you want to save the current settings as
your Default Ticket?
A [Printer Default] check box appears in many of the job ticket
fields on the Job Submission window. This option can be used to
print the job using the queue default, the queue override, or the
option that was set using the PostScript setpagedevice
command.