Selecting A Printer And Queue; Printer And Queue Setup - Xerox 701P40016 Print Manual

Using the XDS Plus software

Selecting a printer and queue

Printer and queue setup

3-8
Guide to Printing Using Xerox Production Print Services
2. In the [Printers] or [Queues] section on the Change
Printer window, double-select the name of the printer or
queue. Or, right-select on a printer or queue and select
[Properties]. The read-only Properties window opens for
the selected queue or printer.
3. When you are finished viewing the information, select
[Close] to close the Properties window.
NOTE: You can also access individual printer and queue
information from the Printers and Queues lists on the Print
Monitor tab window, which you display by selecting
[Administration] on the XDS Plus window.
Follow these steps to select a printer and print queue for your
job:
1. On the XDS Plus window, select [Change Printer] to open the
Change Printer window.
2. If the queue that you want is not displayed in the [Queues]
section, select [Show All Queues].
3. In the [Queues] section, select the name of the queue to
which you want to send the job.
The Printers section displays the name of the printer that is
associated with the queue that you selected.
4. Select [Set Print Path] to confirm your selection and close the
Change Printer window.
NOTE: This can also be performed using the Printer menu and
select [Change Queue].
NOTE: The printer discovery file must be set up on your
workstation before setting up the printer and queue. If the printer
discovery file was not added to your workstation during
installation, select the Preferences option from the Options menu
and add the printer discovery file.
NOTE: Refer to the Installation Guide for the procedure to
create a printer discovery file.