Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Macintosh printing process
4. Set up the print job and job ticket.
The following setup procedures are accessed from the Print
Setup window:
•
Specifying the imaging and finishing options.
•
Including the notes that contain information about the job.
•
Defining the stocks to use during printing.
•
Selecting any special features of the job, such as covers,
blank inserts, or exception pages.
Refer to "Setting up a print job," later in this chapter.
5. Send the document file to the print queue.
Refer to "Submitting a print job," later in this chapter.
NOTE: When you are performing the procedures, if you press
the <Return> or the <Enter> key, the XDS software executes the
default button in any Window. You can use <Tab> to select the
text boxes in every Window.
The steps to print a document on a selected printer are listed
below. For the details on performing the procedure specified in
each step, refer to the procedure explanation later in this
chapter.
1. Set up a printer and select the printer icon on the desktop.
2. Launch the Xerox Document Submission software.
NOTE: More information about how to use the XDS software
is located in the next section of this chapter.
3. On the Document Submission window, select a printer type
from the Printer Type pop-up menu.
4. From the Printer Queue menu, select [Use Default Printer]. If
you want to create Xerox job tickets without printing, select
[None].
5. Select a file for printing.
6. Select [Print...] to set up the print job.
7. On the job ticket dialog box that opens, specify the available
parameters. Depending on your printer, the following
parameter fields may be displayed:
•
[Copies]
Using XDS
2-3
Advertisement
Table of Contents
