Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
Buttons
Viewing printer and queue properties
You can also expand either section to fill the work space of the
Change Printer window by selecting the small, triangular buttons
near the left edge of the splitter bar.
The Change Printer window contains the following buttons:
•
[Show All Printers]: Displays in the Printers section all the
printers that have been specified in the printer discovery file
(printer.disc) and are currently available.
•
[Show All Queues]: Displays in the [Queues] section all
queues that have been created at the controller, for all
printers that have been specified in the printer discovery file
and are currently available.
•
[Set Print Path]: Confirms your queue selection and closes
the Change Printer window. This button is grayed out unless
a queue is selected.
•
[Refresh]: Updates and redisplays the Printers and Queues
lists.
You can view information about printers and queues in the
following ways:
•
Select the printer or queue name on the Change Printer
window.
– If you select a printer name, the [Queues] section of the
Change Printer window displays the queues that are
enabled for that printer only.
– If you select a queue name, the [Printers] section of the
Change Printer window displays only the printer that
contains that queue.
You can select multiple printer or queue names by holding
down the <Control> or <Shift> key while selecting the items.
If you select more than one printer or queue, the other
window displays the queues or printers for all the items that
you selected.
•
Open the Properties window for the desired queue or printer
by following these steps:
1. Select [Change Printer] on the XDS Plus window. The
Change Printer window opens.
Using the XDS Plus software
3-7
Advertisement
Table of Contents
