Table of Contents
Advertisement
Using XDS
2-4
Guide to Printing Using Xerox Production Print Services
•
Page range ([To] and [From])
•
[Job Type]
•
[Disposition]
8. Enter the job notes.
9. Define the stocks that you will use for the print job.
10. Select any special features for the job, such as covers, blank
inserts, or exception pages
11. Select [OK] to send the document file to the printer.
NOTE: When you are performing the procedures, if you press
the <RETURN> or <ENTER> key, the XDS software executes
the task that is initiated by the [Default] button in any dialog box.
If you press <Command(Apple) -Period> or <ESC>, the XDS
software executes [Cancel] when applicable.
Using drag and drop to print one or more jobs
You can select one or more jobs, then drag and drop them on the
XDS icon to print.
Before dragging and dropping the job icon, highlight the
designated printer icon on the desktop.
NOTE: This should be the default printer.
After the jobs are dropped:
1. The printer type selection dialog box is displayed. Select the
printer type on which the jobs will be printed.
2. The Job Ticket dialog box is displayed for the first job that
was dropped. Program the ticket for the job, then select [OK].
If more than one job was dropped at the same time, the first
job is sent to the printer, and the job ticket dialog is displayed
for the next job. The job ticket programming that was selected
for the first job is retained for the next job.
Saved job tickets may be accessed and opened for any job
that has been dragged and dropped using the procedures
that are described in this chapter. When a saved job ticket is
used for a job, the programming of the saved ticket is
retained for the next job.
A job may be cancelled prior to printing from XDS. The Job
Ticket dialog box then opens for the next job in line.
Advertisement
Table of Contents
