Table of Contents
Advertisement
Guide to Printing Using Xerox Production Print Services
2. Make changes to the specifications in the property fields as
desired. Refer to "Specifying stock properties," later in this
chapter, for an explanation of these fields.
3. When finished making changes, select one of the following
buttons at the bottom of the dialog box to save the
modifications:
•
[Save As User Stock]: Saves the modified stock as a
new one. The system assigns it a new, unique ID number.
•
[Modify User Stock]: Saves your changes to the user
stock that you modified and retains its original ID number.
The [Modify User Stock] button is grayed out and unavailable
unless a user stock ID has been selected from the ID menu.
Deleting a stock
To delete a user stock from the stock ID list, follow these steps:
1. On the Paper Stock dialog box, select a user stock ID from
the ID pop-up menu.
2. Select [Delete User Stock]. The selected ID is removed from
the ID menu.
The [Delete User Stock] button is grayed out and unavailable
unless a user stock ID has been selected from the ID menu.
Specifying stock properties
You can use the Paper Stock dialog box to define and save the
descriptions of stocks that you can use for future jobs, or to
modify the properties of an existing stock. You can also specify
properties for a transient stock that you will use only for the
current job and will not save. Transient stocks are defined during
the programming of the job.
NOTE: You can select any value for any stock attribute, even if
the value or attribute is displayed as not being valid for the
current printer.
Specifying the stock size
Follow these steps to specify the size of the stock:
1. From the Size pop-up menu, select a standard stock size or
[Custom].
2. If you selected [Custom], enter the width and length of the
stock in the appropriate text boxes.
Job ticket options
9-15
Advertisement
Table of Contents
