Configure Custom Filenaming; Auto; Advanced - Xerox WorkCentre 4260 Series System Administration Manual

5 Network Scanning
4)
5)
6)
Once you have setup a new destination, you can add it to your Default Template by clicking
[Add] in the [File] section.

Configure Custom Filenaming

1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine
in the Address bar.
2. Press [Enter].
3. Click on the [Properties] tab.
4. Click on the [Services] link.
5. Click on the [Network Scanning] link.
Click on the [Custom Filenaming] link.
6.
7. To allow users to modify the file name at the machine, select the [Allow users to
change the file name] checkbox.

Auto

Using this option, you can create a standard name for network scanning jobs. This data
becomes the default document name for the Default Template and any new templates
created via CentreWare Internet Services.
If the [Name] field is empty, then the value set in the Default Template will be used as the
default document name.

Advanced

Using this option, you can enter more specific data formats and types, such as:
• Date
• Day of Month
• Month
• Year
• Time (24 hour)
66
Click on the [Protocol] that the Server will use for storing scanned images from
the machine.
Enter the Server Location details where scanned images from the machine will
be stored.
Click on the [Apply] button to accept the changes.
The alternate Network Scanning destination will now appear in the [Alternate
File Destinations] list. When you create a new template or edit the default
template, you will have the option to add the new destination just created.
Xerox WorkCentre 4260 Series System Administration Guide