Xerox WorkCentre 4260 Series System Administration Manual page 61

Installable Options
1. If Bi-directional Setup is enabled, the driver will update with the options installed on
the device.
2. If Bi-directional setup is not enabled, select the options that are installed on your
device.
NOTE:
NOTE:
3. Click on the [OK] button.
Accounting
If you have an Accounting feature such as Xerox Standard Accounting or Network
Accounting installed, you can enable Accounting in the driver. For further information, see
Chapter 12, Network Accounting on page 111.
1. Click on the [OK] button to close your print driver Properties.
Printing Preferences
Printing Preferences contains all the driver features and allows you to set default settings for
the driver.
Within your Printers folder, right-click on the WorkCentre 4260 print driver and select
1.
[Printing Preferences].
NOTE:
feature.
Paper/Output
2. Click on the [Paper/Output] tab.
3. Click on [Job Type].
Job Type allows you to send the following types of print jobs to the device:
•
•
•
•
•
4. Click on the [Paper] menu. The Paper menu allows you to select the specific paper
that you want to print on.
5. Click on [Advanced Paper Selection]. Advanced Paper Selection allows you to input
custom measurements for non-standard paper sizes, and also scale your document.
6. Click on the [Original Document Size] menu.
7. Click on [New]. The [New Custom Size] box opens.
8. To create a custom size page:
Xerox WorkCentre 4260 Series System Administration Guide
LAN Fax requires the Embedded Fax feature to be installed.
Job Storage requires the Save Job for Reprint feature to be enabled.
Click on the [Help] button in the driver to view information about each
Secure Print.
Sample Set.
Delay Print.
Saved Job.
Fax Job.
Windows Printing
49