Verify That Local Authentication Is Enabled At The Machine; Authentication; Overview - Xerox WorkCentre 4260 Series System Administration Manual

15 Security
6. Re-type the password in the [Retype Password] field.
7. Enter the user's e-mail address in the [E-mail Address] field.
8. Enter the user's phone number in the [Phone Number] field.
9. Click on [Apply] to add the new User.
10. You can export the list of User accounts to your computer and then open and make
changes to the file in an application that supports comma separated values .CSV
files, for example Microsoft Excel:
a) Click on the [Export to File] button within the [User Accounts] area.
b) Select a location on your computer where you want to save the list. It is
c) Open the [.csv] file to edit the list of user accounts. Up to 5000 user accounts can
11. To upload the amended list back to the machine:
a) Click on the [Import from File] button within the [User Accounts] area.
b) Browse to the location of the list and click on [Apply]. The list will populate the
12. Follow the steps below.

Verify that Local Authentication is enabled at the machine:

13. Select a feature tab, such as Network Scanning or E-mail.
NOTE:
14. Enter a local user account and password.
15. Touch [Enter]. The optional feature should become accessible.
802.1X Authentication
This is the procedure to follow to install and setup 802.1X Authentication:
1. Overview on page 138
2. Information Checklist on page 139
3. Enable 802.1X on page 139

Overview

The Xerox machine supports IEEE 802.1X Authentication via Extensible Authentication
Protocol (EAP). IEEE 802.1X ensures all machines on the network are authenticated and
authorized to use the network. 802.1X can be enabled for machines connected through
wired Ethernet networks.
138
recommended that you save the user account list in case of a problem with the
machine.
be created.
User Accounts area.
It may be necessary to press the <Services Home> button first.
Xerox WorkCentre 4260 Series System Administration Guide