Http/Https; Information Checklist - Xerox WorkCentre 4260 Series System Administration Manual

8. Click on [IP Address] or [Host Name], enter either the IP Address or Host Name of
the computer where the Fax Repository (SMB Server/Workstation) is located.
•
NOTE:
9. Enter the name of the [Share].
10. Enter the Document Path from the Share to your specific folder in the [Document
Path] entry box.
For example, if the path is sharename/wc/scans, enter /wc/scans.
11. Enter the User Account and Password in the [Login Name] and [Password] boxes.
NOTE:
12. Enter the Password again in the [Retype password] entry box.
Select the [Select to save new password] checkbox.
13.
14. Click on the [Apply] button to accept the changes.
If prompted, enter the Administrator's User ID [admin] and Password [1111], and
click on [Login].
15. Continue to Optional Step: Configure Defaults – page 99.

HTTP/HTTPS

HTTP - This is used to fax to a Web Server.
HTTPS - This is used to fax to a Secure Web Server.

Information Checklist

Before starting the Installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. Ensure that web services and a web service (such as Apache) are running on the
server:
a) The machine will send POST requests and scanned data to the Server for
b) Write down the IP Address or Host Name of the Server.
2. Download a sample script:
a) At your Workstation, open the web browser, enter the IP Address of the machine
b) Press [Enter].
c) Click on the [Properties] tab.
d) Click on the [Services] link.
e) Click on the [Fax] link.
f) Click on the [Fax Repository Setup] link.
g) Select [HTTP] or [HTTPS] from the Protocol drop-down menu.
Xerox WorkCentre 4260 Series System Administration Guide
Enter the Port Number, if required (Default is 139).
It is recommended that the default port setting is used.
The supplied Username must have permission to access the Fax folder.
processing by a script.
in the Address bar.
Configure a Server Fax Repository
97