Xerox WorkCentre 4260 Series System Administration Manual page 33

• Privacy Password (minimum 8 characters) – Enter the privacy password using 8 to 32
characters.
• Confirm Privacy Password – Re-enter the privacy password for verification.
Print Drivers/Remote Clients Account:
• Account Enabled – Select to enable the print drivers/remote clients account. This
account allows client computers and drivers a limited access to the features on the
machine. If the machine does not have SNMP v1/v2c enabled, and does not have this
account enabled, SNMP clients will not be able to communicate with the machine.
The default passwords should be used, unless the passwords have been changed on
client computers.
• Reset to default Password – Click this button to reset your password to the default.
• Advanced – Displays a page that contains the [Add UDP IPv4], [Add UDP IPv6
Address], [Add IPX Address], and [Delete] buttons.
• Add UDP IPv4 Address – This button displays the [SNMP Configuration - IPv4] page,
which allows you to set the following settings.
IP Trap Destination Address:
•
•
•
Traps:
•
•
• Add UDP IPv6 Address – This button displays the [SNMP Configuration - IPv6] page,
which allows you to set the following settings.
IP Trap Destination Address:
•
•
•
Traps:
•
•
• Add IPX Address – This button displays a page that allows you to set the following
settings.
IPX Trap Destination Address:
•
•
Xerox WorkCentre 4260 Series System Administration Guide
IP Address: Enter the IPv4 address of the SNMP agent that you are setting up to
receive traps.
UDP Port Number: Enter the UDP port number of the SNMP agent.
SNMP Version: Select the SNMP version of the SNMP agent.
TRAP Community Name: Enter the trap community name of the SNMP agent.
Trap to be Received: Select the types of traps to receive from the SNMP agent.
IP Address: Enter the IPv6 address of the SNMP agent that you are setting up to
receive traps.
UDP Port Number: Enter the UDP port number of the SNMP agent.
SNMP Version: Select the SNMP version of the SNMP agent.
TRAP Community Name: Enter the trap community name of the SNMP agent.
Trap to be Received: Select the types of traps to receive from the SNMP agent.
IPX External Network Number: Enter the IPX external network number of the
SNMP agent that you are setting up to receive traps.
Physical MAC Address: Enter the physical MAC address of the SNMP agent.
TCP/IP
21