Samson 3730 Series Mounting And Operating Instructions page 98

Setting with TROVIS-VIEW software – Parameter list
Status
Condensed state
Fault exists
(fault alarm contact)
Status of limit switch
A1
x falls below A1
Status of limit switch
A2
x exceeds A2
Operational status
Temperature
98
EB 8384-3 EN
Display and alarm
Summarized state of the positioner.
The condensed status is made up from the var-
ious states.
The condensed status can take on the following
states:
No alarm
Maintenance required
Maintenance demanded
Maintenance alarm
Function check
The condensed states "Maintenance required"
and "Maintenance demanded" are also indi-
cated on the positioner display by
The condensed status "Maintenance alarm"
causes the fault alarm symbol to appear on
the display.
Status of the fault alarm contact
Status of the switching output for limit switch A1
Indicates whether the controlled variable x has
fallen below the limit for A1
Status of the switching output for limit switch A2
Indicates whether the controlled variable x has
exceeded the limit for A2
Indicates the current operational status of the
internal control
Current temperature in the positioner
.