Samson 3730 Series Mounting And Operating Instructions page 105

Positioner – Start-up
Reading direction
Pin position
Initialization mode
Pressure limit
Determined nom-
inal range
Minimum transit
time OPEN
Minimum transit
time CLOSED
Fail-safe action
Positioner – Start-up – Initialization
Initialization mode
Device initialized
Initialization
Pneumatic Pneumatic
connection connection
right/left right
Off Off
17/25/35/50/
70/100/200 mm
90°
Nominal range Maximum
range
Maximum range
Manual adjust-
ment
Substitution
Off /2.4/3.7/ Off
1.4 bar
Nominal range Maximum
range
Maximum range
Manual adjust-
ment
Substitution
Setting with TROVIS-VIEW software – Parameter list
Code 2
Code 4
Code 6
Code 16
Code 5
Code 40
Code 41
Fail-safe action of the actuator upon air/auxil-
iary power failure or device start-up.
Determined during initialization by the position
of the slide switch (see section 5.1).
In double-acting actuators, the fail-safe position
relates only to the failure of the auxiliary power
supply. There is no defined position when the
supply air fails.
Code 6
Status of device initialization
Starting of initialization procedure.
The initialization mode parameter must be first
set to the required initialization procedure.
105
EB 8384-3 EN