Samson 3730 Series Mounting And Operating Instructions page 35

Table 6
Direct attachment
Accessories for
actuator 120 cm²
Direct attachment
NAMUR attachment
Attachment to
micro-flow valves
Attachment to rotary
actuators
Table 7
Accessories
Attachment to the control valve – Mounting parts and accessories
Mounting parts for position sensor
Mounting parts for actuators with 120 cm² see Fig. 12 left
Connecting plate (9, old) for Actuator
Type 3277-5xxxxxx.00
Connecting plate (new) for Actuator Type 3277-5xxxxxx.01 (new)
Note: Only new switchover and connecting plates can be used with new actuators
(Index 01). Old and new plates are not interchangeable.
Mounting parts for actuators with 240, 350 and 700 cm², see Fig. 12 right
Mounting parts for attachment to NAMUR rib w. lever L and XL, see Fig. 13
Mounting parts for Type 3510 Micro-flow Valve, see Fig. 14
VDI/VDE 3845 for all sizes of fixing level 2
Mounting parts with follower clamp and coupling wheel
CrNiMo steel bracket, see Fig. 15
VDI/VDE 3845 for all sizes of fixing level 2, heavy-duty version
SAMSON Type 3278 160 cm
heavy-duty version
Postioner accessories
Connecting plate (6)
or pressure gauge bracket (7)
Pressure gauge mounting kit (8) up to max. 6 bar
(output and supply)
Bracket to mount the positioner on a wall
Note! The other fastening parts are to be provided at the site of
installation as wall foundations vary from site to site.
2
/ VETEC Type S160 and Type R,
Order no.
1400-7472
G 1/8 1400-6820
1/8 NPT 1400-6821
1400-6823
1400-7471
1400-7468
1400-7469
1400-7473
1400-9384
1400-9385
Order no.
G ¼ 1400-7461
¼ NPT 1400-7462
G ¼ 1400-7458
¼ NPT 1400-7459
St. steel/Brass 1400-6950
St.st./St. steel 1400-6951
0309-0111
EB 8384-3 EN
35