Samson 3730 Series Mounting And Operating Instructions page 107

Positioner – Simulation
Alarm test A1
Alarm test A2
Alarm test A3
(alarm fault output)
Diagnosis
Diagnosis level
setting
Current operating
mode
Diagnosis – Status alarms
Status
Condensed status
Operating hours
counter
Device in closed
loop
Device switched on
since last
initialization
Device in closed
loop since last
initialization
Error occurred
(fault alarm output)
Solenoid valve
status
Fail-safe position
Device initialized
Start performed
with default settings
Local operation
active
Configuration
changed
Setting with TROVIS-VIEW software – Parameter list
Expert
Automatic
Alarm symbol
Display or status
Code 28
Code 28
Code 28
Indicates current operating mode of positioner
Summarized condensed status.
Made up from various states.
Time elapsed since first initialization
Time elapsed in closed loop since first initializa-
tion
Time elapsed since last initialization
Time elapsed in closed loop since last initializa-
tion
Status of fault alarm output
Status of optional solenoid valve
Fail-safe action of actuator upon air
supply/auxiliary power failure or device
start-up.
Determined during initialization.
Status of device initialization
Indicates whether a start has been performed
with default settings.
Local operation is active
Status of device status bit configuration
changed.
107
EB 8384-3 EN