Samson 3730 Series Mounting And Operating Instructions page 103

Enable limit value
A1
Limit value A1
Enable limit value
A2
Limit value A2
Fault alarm with
"Function check"
condensed status
Fault alarm with
"Maintenance
alarm" or
"Maintenance re-
quired" condensed
status
Zero point limit
Positioner – Error control – Classification report
Condensed status error alarms
Note!
Each fault alarm has a status assigned to it.
The possible states are placed in order starting with the lowest priority:
Maintenance required
Maintenance demanded
Maintenance alarm
Function check
No alarm
The fault alarm present in the device with the highest priority determines which condensed status is dis-
played.
The condensed states "Maintenance required" and "Maintenance demanded" are also indicated on the
positioner display by
The condensed status "Maintenance alarm" causes the
play.
On/Off On
0.0...100.0 % 2.0 %
On/Off On
0.0...100.0 % 98.0 %
Yes/No No
Maintenance Maintenance
alarm only and alarm
Maintenance
required only
0.0...100.0 % 5.0 %
Alarm is not added to the condensed status
.
Setting with TROVIS-VIEW software – Parameter list
Code 26
Code 26
Code 27
Code 27
Code 32
Code 33
Limit for zero point monitoring
Lowest
Highest priority
fault alarm symbol to appear on the dis-
103
EB 8384-3 EN