Table of Contents
Home Page
OfficeServ 7100
INSTALLATION
TECHNICAL MANUAL
PART 2 APRIL 2007
2.4 INSTALLING ON A WALL
This section describes how to install the OfficeServ 7100 cabinet on a wall. The
OfficeServ 7100 wall mount bracket is required (included with the cabinet).
2.4.1 Required Tools
• Mid-sized Phillips screw driver
• Electric drill
• Hammer
• Wall-mount bracket
• Four plastic anchors
• Four cross-type screws
• Four Mount locking screws
Figure 2.5 Required Tools for the installation on a Wall
2.4