Samsung OfficeServ 7100 Technical Manual page 30

OfficeServ 7100
TECHNICAL MANUAL
port LAN Switch that receives/transmits data from/to Intranet or Internet. The 4SWM provides
four 10/100 BASE-T Ethernet ports and performs the Layer 2 Switching function. These four
ports support Power Over Ethernet (PoE) and are IEEE 802.3af compliant.
Power constraints must be taken into consideration when plugging ITP phones and
WAP devices into the 4SWM PoE module.
• The OS 7100 power supply supports a maximum of 24 TDM phones or SEPU
(Samsung equivalent power units). One power unit is equal to one (2 line TDM
phone).
• A maximum of 4 ITP phones or 4 WAPs can be supported by the 4SWM PoE
module.
• Each time an ITP phone is plugged into the 4SWM PoE port, the system capacity
for TDM phones is decreased by 5.
• Each time an WAP is plugged into the 4SWM PoE port, the system capacity for
TDM phones is decreased by 6.
• External power can be used to power the ITP phones and WAPs. If external power
is used to supply power to the ITP phones or WAPs, no SEPU are used from the OS
7100 4SWM PoE module.
POWER CONSUMPTION
OS7100 Samsung Equivalent Power Units (SEPU)
Devices
iDCS Phones
DS 5000 Phones
ITP Phones
SMT 5000 WAPs
If you need more than 4 ethernet ports, you can uplink this to an external layer 2 data
switch providing additional ports.
KSU Power Units
1
1
5
6
3.13
Home Page
INSTALLATION
PART 3 APRIL 2007
Optional Power
n/a
n/a
AC adapter or External
PoE Switch
AC adapter or External
PoE Switch
Table of Contents