Samsung OfficeServ 7100 Technical Manual page 71

OfficeServ 7100
TECHNICAL MANUAL
INSTALLATION TOOL AND MODEM CONNECTION VIA TELCO LINE
This example is based on a PC using an internal modem card. Connect Telephone
line cord from internal modem connection of PC directly to loop start telco line.
1. Execute IS tool
2. Click [System] -> [Link Control] menu to set the communications link.
3. Enter System Name (eg; ABC Company).
4. Select the <link type> (eg; MODEM).
5. Input the Telephone number (eg; 972-372-4812).
6. Input the Com Port (eg; COM1).
7. Input the Baud Rate (eg; 38400bps).
8. Click [Apply].
9. Dialog box show: "Do you want to apply new setting value?"
10. Click [Yes].
11. Dialog box shows: "The new setting value is applied."
12. Click [OK]; Click [Close].
13. Click [System]; Click [Connect].
14. Enter Password [Samsung]; then [OK].
Figure 7.22 Installation Tool and Modem Connection
7.19
Table of Contents
Home Page
INSTALLATION
PART 7 APRIL 2007