Samsung
DCS-408 & 408i Keyphone System
solder the ends of the two cables together, or
expose sufficient wire on both cables to twist them together tightly (Fig. 4.)
Externally grounded cable
NOTE: The cable for external grounding is not supplied with your system and should be
prepared separately.
The system can now be installed as a freestanding unit or may be secured to a wall using the
following procedure.
Fixing the System on the Wall (Optional)
The unit has three grooves on the rear for fixing to a wall using the screws and rawl plugs
provided.
Green cable
Figure 4
– 11 –
Installation Manual
Twist wires tightly