Samsung OfficeServ 7100 Technical Manual page 59

OfficeServ 7100
TECHNICAL MANUAL
MMC
MMC 211
program duration of contact closure.
program, refer to OfficeServ 7100 Programming Section.
7.1.7 Connecting KDBF
Keyset Daughter Board module installed on a speakerphone connected to the
OfficeServ 7100 system. The module enhances the function to full-duplex functionality.
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the
attachment clips and press outward while simultaneously pressing
down on the keyset body with your fingertips.
Figure 7.11 Adding an iDCS KDBF Keyset Daughtercard Module
iDCS KDB-FULL DUPLEX (FKDBF)
This daughter card can only be installed in the iDCS 28 and iDCS 18 button phones.
The standard speakerphone mode of operation for a iDCS keyset is "half duplex". This
means that you cannot transmit and receive speech at the same time. Adding a FKDBF
to your keyset will convert the speakerphone into full duplex mode enhancing its
is used to assign call numbers to door phones. Use
REMOVE
KNOCKOUTS
7.7
Home Page
PART 7 APRIL 2007
For detailed instruction on the MMC
SECURING
SCREWS
Table of Contents
INSTALLATION
MMC 501 to