OfficeServ 7100
TECHNICAL MANUAL
2) Set the subnet.
3) Set the gateway address.
4) Reset the MP10.
MP10 Reset
New settings are applied only after the card is reset. The system may
malfunction if the card is not properly initialized.
INSTALLATION TOOL AND LAN CONNECTION
1.
Execute IS tool
2.
Click [System] -> [Link Control] menu to set the communications link.
3.
Enter System name (eg; ABC Company).
4.
Select the <link type> (eg; LAN).
5.
Input the IP address (eg; 192.169.9.209).
6.
Click [Apply].
7.
Dialog box show: "Do you want to apply new setting value?"
8.
Click [Yes].
9.
Dialog box shows: "The new setting value is applied."
10. Click [OK]; Click [Close].
11. Click [System]; Click [Connect].
12. Enter Password [Samsung]; then [OK].
Figure 7.21 Installation Tool and LAN Connection
7.18
Table of Contents
Home Page
INSTALLATION
PART 7 APRIL 2007