Machine Setting- Select Lens Page
The Select Lens Page allows you to modify the lens settings after you have changed to a different focal lens.
Remember to save your settings after you have made the proper changes. After that, pressing the Auto Focus
button on control panel, the laser machine will conduct auto focus accordingly using the new lens setting.
This machine includes different models which equipped different laser tubes, make sure the laser tubes installed
with your machine before making adjustment.
•
CO2 Laser Focal Lens: 1.5"/ 2.0"/ 2.5"/ 4.0" (Default 2.0")
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Select Lens Page
Back to previous page
Save your current settings
Cycle through selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
87
Navigating to this page:
Main Work Page
Press
F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Select Lens>
from the menu
Set Lens Page
Function