Table of Contents
Advertisement
2) Click "AutoFocus" button of laser machine to automatically set the focal distance precisely.
3) Open the file or import prn file.
4) Click "Vision" on the menu bar and select "SmartCONTROL Vision" to launch the Vision operation window
5) Go to the "Mark Learning" tab and select mark mode. The illustration is 4 marks mode.
6) Input registration mark diameter/ dimension or line width value in the Mark Diameter / Line Width field.
NOTE
Mark diameter/ line width value must be between 0.3mm~2.5mm.
For example
160
Advertisement
Table of Contents
