Table of Contents
Advertisement
File Edit Raster Page
The File Edit Raster Page allows you to edit the raster power and speed settings, as well as enable or disable
SmartACT for the selected job. These settings correspond to the same settings found on the printer driver. This
page allows you to easily adjust these values to make immediate adjustments while processing your loaded
jobs, even when you have disconnected your computer from this machine.
•
Raster Power: 0.0% - 100%
•
Raster Speed: 0.0% - 100%
•
SmartACT: YES/ NO
Relevant Buttons
F1 (Back)
/ Directional
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
File Edit Raster Page
Back to previous page
Scroll through your loaded jobs
Cycle through the available selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
83
Navigating to this page:
Main Work Page
Press
Functions Page
Select <File Manage
menu> from the menu
File Management Page
Select a job file and press
Enter
File Information Page
Press
File Management Edit Page
Select <Raster Setting>
from the menu
File Edit Raster Page
Function
F4
F4
Advertisement
Table of Contents
