Table of Contents
Advertisement
Link / DLink Page
The Link / DLink Page allows you to set, arrange, and remove loaded jobs to and from a job queue for processing.
Use the directional keys to cycle through your loaded jobs, then simply press the <F2 (Link)> key to add a file to
the job queue. The job queue will be set in a sequential order based on the order you link the files. To remove a
job from your job queue, press the <F4 (DLink)> key.
The first column field (before the file name) displays the job number. The sequence for your job queue is
displayed in the two columns to the right of your file names. The first column to the right of your job file name
displays the job number of the previous file in the job queue sequence. The second column after the file name
displays that job's next file in the job queue sequence. First and last jobs in the job sequence you set will have
a (---) in the first and second columns respectively. So according to the image above, the job queue sequence
has been set to be processed in this order: 03:Marble.cdr 01:Marble.cdr 02:Marble.cdr.
Relevant Buttons
F1 (Back)
F2 (Link)
F4 (DLink)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Link / DLink Page
Back to previous page
Add the currently-selected job to the job queue
Remove the currently-selected job from the job queue
Scroll through the menu selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
80
Navigating to this page:
Main Work Page
Press
F4
Functions Page
Select <File Manage
menu> from the menu
File Management Page
Press F2
Link / Dlink Page
Function
Advertisement
Table of Contents
