Table of Contents
Advertisement
Operating SmartCONTROL
SmartCONTROL
allows users to assign any graphic to be registration marks, at the meantime, if high precise
TM
cutting is required, we suggest you to use circle, square, crosshair or star as registration mark which we call it
"Registration Mark Ready" scenario.
NOTE
•
The recommended value for registration mark size is between 1mm-2.5mm. Marks in extreme
dimension may affect the precision of CCD reading.
•
Under the Registration Mark Ready scenario, SmartCONTROL
mark #2~#4. Make sure all the registration marks are the same type and filled before
converting the graphic file to prn format.
SmartCONTROL
TM
1) Place the printed object of the machine platform.
Vision
TM
Vision Operation – Registration Mark Ready Scenario
TM
will automatically define the
159
Advertisement
Table of Contents
