Table of Contents
Advertisement
22) If there is an error with the material placement, SmartCONTROL
"Pattern Match Failure" message will pop up, press the "OK "button to continue.
23) Move the carriage with red beam to the failed mark.
24) Click "Execute" again, SmartCONTROL
job.
NOTE
If the printed object placement angle is too large, SmartCONTROLTM Vision may fail to read the
marks. Repeat Step 22 ~ Step 24.
Array Copy Function
When the design graphic is repeatable and is arranged in matrix, you can only have CCD to learn one set of
registration marks for all the graphics by using Array Copy function.
TM
Vision will automatically calibrate the position and continues the
173
Vision may not be read correctly.
TM
Advertisement
Table of Contents
