Table of Contents
Advertisement
Step 7. Insert USB flash drive to the USB Storage port of this machine
NOTE
USB storage function only supported for the PRN format, you can convert the file to PRN format from
the printer driver.
Step 8. Navigate the control panel through <F4> Function <File Management> <USB Drive File>
Step 9. Choose the file and press Enter button from control panel to transmit the file to laser engraver.
Step 10. Press START button on control panel to begin laser jobs.
NOTE
File cannot be written to laser machine, please do not remove the USB flash drive if you want to keep
process the job.
46
Advertisement
Table of Contents
