Wiring - Trane Climate Changer T Series Installation Operation & Maintenance

Wiring

Grounding Required!
All field-installed wiring must be completed by qualified personnel. All field-installed
wiring must comply with NEC and applicable local codes. Failure to follow these
instructions could result in death or serious injuries.
Entrances are provided for field-installation of high and low voltage wiring through a
pipe/nipple connection in the base of the unit. The low- and high-voltage connections are
on opposite sides of the unit on sizes 3 - 57 and on the same side for sizes 66 - 100. Before
installation, consider overall unit serviceability and accessibility before mounting,
running wires (power), making penetrations, or mounting any components to the
cabinet.
Wiring to T-Series units must be provided by the installer and must comply with all
national and local codes. The fan motor nameplate includes a wiring diagram. If there are
any questions concerning the wiring of the motor, write down the information on the
motor nameplate and contact your local Trane sales office.
CLCH-SVX06A-EN • T-Series Climate Changer Air Handler
WARNING
General Information
9