Trane Climate Changer T Series Installation Operation & Maintenance page 57

Refrigerant Coil Piping
Note: Refer to the "Protecting the Environment" section on page 3 for information on
Use
refrigerant lines that connect the condensing unit to an evaporator coil. Refer to
"Examples of Field-Installed Evaporator Piping" on page 61
schematics of evaporator piping.
Figure 44. Example of placement for split-system components
CLCH-SVX06A-EN • T-Series Climate Changer Air Handler IOM
handling refrigerants.
Figure 44 to determine the proper, relative sequence of the components in the
Discharge
Manual
angle valves
Check/relief
Condensing unit
Expansion
valves
Distriburtor
Frostat™ control
line
Compressors
valve
Solenoid
Moisture-
valve
indicating
sight glass
Manual
ball valve
Access
port
Kit with sensor - X13790452010 SEN-01212
Kit with switch - X13100429010 THT 02442
Installation - Piping
for more detailed
Manual
ball valve
Access
port
ball valve
Liquid line
Access
Filter drier
port
with access
port
Manual ball valve
Suction line
Access
port
Filter
Manual
57