Encoder Scale Replacement - Roland VersaCamm VS-640i Service Notes

3-15 ENCODER SCALE REPLACEMENT

Remove the Covers in order.
1
1. Right Cover
2. Left Cover
3. Front Cover
4. Right Top cover
5. Front Rail Cover
6. Top Cover
7. Ink Cartridge Cover
Move the Head Carriage leftwards.
2
Remove the Encoder Scale by removing the plate fi xing the
3
Encoder Scale at its right end and the spring on its left end.
Remove the Spring Plate from the Encoder Scale and fi x it to
4
the new Encoder Scale where there is no cutout on it.
Make sure not to scratch or put grease on the En-
coder Scale when fi xing it.
Do not touch the surface of the Encoder Scale.
Left Cover
Front Rail Cover
Front Cover
Spring
Spring Plate
3-79
Ink Cartridge Cover
Top Cover
Right Top Cover
Right Cover
Encoder Scale
Plate
Cutout